Skip to content
Industrial spray systems · Dust suppression · Pollution control+974 4142 9673info@sflo.netEnglishالعربية
Synergy Spray Systems

Dust suppression

Dust Suppression Chemicals and Binding Agents

Wetting agents and binders extend the life of each water application on haul roads, stockpiles and open ground — a strong option where water is scarce and evaporation is high.

Request a quote+974 4142 9673

Dust suppression chemicals for material handling and mines

At Synergy Spray, We supply and distribute Dust Suppression Chemicals from GreenFission Chemicals for effective dust contorls in various material handling operations including Mines, haul roads, conveyors and many other places

The Dust Suppressant are best for controlling dust on roads, mines and industrial areas. This suppressant helps in increasing the surface area of water droplets, which helps in covering more area and reduces the water consumption.

This unwanted fugitive dust controller is extensively well known for its unique characteristics like eco friendly, reduce water consumption, lower soil erosion, improvise vehicle productivity and easy to mix.

Benefits:

Reduce dust control costs and infrastructure maintenance costs;

Stabilize and strengthen soil by mixing binding agents and sometimes extra structure into the soil;

Control and monitor the Particulate Material (MP) to control dust emission from unpaved roads, crushers, stockpiles and other industrial process;

Optimize the use of water and additives under the highest standards of safety, quality and environmental impact;

Better logistics of your project with easier access and fewer vehicle journeys needed;

Access your site no matter the weather with your strong and weather-protected soil;

Lower permeability;

Reduce up to 50% of road depth required to reach your bearing capacity;

Push more workload with strong and compact surfaces at your site;

Reduce road material loans by using our ionic soil stabilization products for clay soils;

Prevent dust and other harmful material from coming off the roads and paths and into your site.

Dust Suppression Chemicals

How we deliver

From first survey to long-term support

  1. SurveyWe review drawings, photos or visit the site to map each emission point, heat load or spray duty and the utilities available.
  2. EngineerNozzle selection, hydraulic sizing, layouts and control philosophy are prepared and submitted for your approval.
  3. ManufactureNozzles, headers, pump skids and panels are manufactured, assembled and tested before dispatch.
  4. InstallOur team and local associates install, commission and train your operators on site.
  5. SupportSpares, inspections and maintenance keep the system performing season after season.

Frequently asked questions

Will suppression system be used on the conveyor belts?

Yes

Should the water used in suppression be clean?

Yes the water needs to be pre filtered or the nozzles can get blocked due to dust

What will be the flow per nozzle?

It varies depending on the particle size.

What if the nozzles stop working?

Nozzles should be removed and cleaned

Will complete technical survey of site be done?

Yes our team will visit the site and do the complete survey and answer all queries

When should I use this system?

This system is generally essential when there a lot of dust flying up in the air and causing severe pollution to the work places and well as nearby areas

Which dust suppression technology is right for my site?

It depends on the particle size, whether the source is enclosed or open, how much moisture the material can accept and the water and compressed air available. Dry fog suits enclosed transfer points, wet fog and plain-water sprays suit open sources, and fog cannons cover large stockpiles and yards. We confirm the choice after reviewing your layout.

How much water does a dust suppression system use?

Consumption varies widely by technology. Dry fog systems add well under 1% moisture to the material, while plain-water sprays and sprinklers use more. For GCC sites we design around water availability first, and can work with treated sewage effluent or recycled process water where quality allows.

Do you install and commission systems across the GCC?

Yes. Projects are engineered and managed from Qatar, and delivered with our associates in the UAE, Saudi Arabia, Bahrain and other GCC countries, including installation, commissioning and operator training.

Have a dust problem to solve?

Send us the material, tonnage and a few photos of the emission points. We will come back with a recommended technology and a budgetary proposal.

Request a quoteWhatsApp+974 4142 9673