Skip to content
Industrial spray systems · Dust suppression · Pollution control+974 4142 9673info@sflo.netEnglishالعربية
Synergy Spray Systems

Cooling and humidification

Mist Cooling Towers

Portable and fixed mist towers combine a fan with a high-pressure nozzle ring to cool open workplaces, queues and yards where ducted cooling is not practical.

Request a quote+974 4142 9673

Mist tower

Manufacturers and supplier of Mist cooling towers for Qatar and the GCC. We have wide variety of customised system which are designed, manufactrued, tested and deployed as per application requirements.

Mist cooling tower uses atomized water with air and dissolves into micron sized particles that “flash-evaporate”. The smaller the water droplets, the better the cooling and lubrication.

Mist Cooling Towers

Cooling where ducted air cannot reach

A mist tower pairs an axial fan with a ring of high-pressure nozzles. The fan carries the evaporating mist several metres, creating a noticeably cooler zone around rest areas, workstations and queues.

Units are available as portable towers with an integrated tank and pump, or fixed towers supplied from a central pump set.

Typical users

  • Construction and shutdown rest areas
  • Fabrication yards and workshops
  • Outdoor events and sports venues
  • Warehouses and loading bays
  • Farms and livestock sheds

How we deliver

From first survey to long-term support

  1. SurveyWe review drawings, photos or visit the site to map each emission point, heat load or spray duty and the utilities available.
  2. EngineerNozzle selection, hydraulic sizing, layouts and control philosophy are prepared and submitted for your approval.
  3. ManufactureNozzles, headers, pump skids and panels are manufactured, assembled and tested before dispatch.
  4. InstallOur team and local associates install, commission and train your operators on site.
  5. SupportSpares, inspections and maintenance keep the system performing season after season.

Frequently asked questions

Does mist cooling work in Gulf humidity?

Evaporative cooling performs best in hot, dry air, which is typical inland and for much of the day. In coastal, humid conditions the temperature drop is smaller, so we design with the local climate data and often combine mist with air movement to maintain comfort.

What water quality is required?

High-pressure nozzles have very small orifices, so filtered, low-hardness water is important. We include filtration and, where needed, water softening or RO in the system to protect the nozzles.

How often do the nozzles need maintenance?

With correct filtration, nozzles typically need only periodic inspection and cleaning. Anti-drip nozzles are removable by hand and inexpensive to replace.

Planning a cooling or humidification project?

Send us the area, ceiling height and the temperature or humidity you need to reach. We will size the pump, lines and nozzles for you.

Request a quoteWhatsApp+974 4142 9673