Cooling and humidification
Outdoor Cooling and Water Misting Systems
High-pressure water misting makes outdoor spaces usable through the Gulf summer — terraces, walkways, queues, courtyards and open workplaces.
Cooler outdoor spaces without wet floors
A high-pressure pump pushes filtered water through stainless steel lines to nozzles with orifices as small as 0.15 mm. The mist flash-evaporates, lowering the surrounding air temperature without leaving surfaces wet.
Lines can be fixed discreetly along beams, pergolas and shade structures, or combined with fans to carry the cooled air further in open areas.
Where outdoor misting is installed
What is included
- Site survey and nozzle layout
- High-pressure pump set with filtration
- Stainless steel or nylon high-pressure lines
- Anti-drip brass or stainless steel nozzles
- Timer, thermostat or humidistat control
- Installation, commissioning and maintenance
Components
Frequently asked questions
Does mist cooling work in Gulf humidity?
Evaporative cooling performs best in hot, dry air, which is typical inland and for much of the day. In coastal, humid conditions the temperature drop is smaller, so we design with the local climate data and often combine mist with air movement to maintain comfort.
What water quality is required?
High-pressure nozzles have very small orifices, so filtered, low-hardness water is important. We include filtration and, where needed, water softening or RO in the system to protect the nozzles.
How often do the nozzles need maintenance?
With correct filtration, nozzles typically need only periodic inspection and cleaning. Anti-drip nozzles are removable by hand and inexpensive to replace.
Planning a cooling or humidification project?
Send us the area, ceiling height and the temperature or humidity you need to reach. We will size the pump, lines and nozzles for you.